What Everything Costs, Written Down Before You Ask
One page, no packages, no membership. A session fee buys bay time and a spec sheet. Components and bench labour are quoted separately and never bundled into a number designed to look simple.
The fitting fee comes off the labour on any build ordered through us inside sixty days. It is not a discount on components — those are sold at cost plus a flat handling charge we will show you.
Six Single Sessions and Two Combinations
| Session | Bay time | Fee | What the hour is spent on |
|---|---|---|---|
| Driver Session | 75 minutes | $135 | One club, three variables, and a launch window that has to survive both the valley and a sea-level trip. |
| Fairway Wood Session | 75 minutes | $135 | Judged off hardpan and thin autumn turf, not off a perfect mat lie. |
| Hybrid Session | 70 minutes | $125 | Where the long irons stop earning their place, and what replaces them. |
| Iron Set Session | 105 minutes | $195 | A whole set measured as one spread, so the gaps hold together instead of individually. |
| Wedge Session | 80 minutes | $145 | Bounce, grind and loft chosen for firm high-desert ground and the odd wet spring week. |
| Putter Session | 70 minutes | $125 | Length, lie and head balance checked against the stroke you actually make under a clock. |
| Top of the Bag | 2 hours | $225 | Driver, fairway woods and hybrids handled together so the long clubs stop overlapping. |
| Full Ledger (two visits) | 2 visits, 4 hours total | $395 | Every club in the bag, mapped across two appointments with a week of play in between. |
Every session includes the static spec audit of whatever you bring in, the three-column carry sheet, and any small bench adjustment made during the appointment itself.
If You Would Rather Not Read a Table
One Club, One Question
- Hybrid, wedge or putter session
- Static audit of what you own
- Eighteen-swing baseline
- Three-column carry sheet
The Iron Set
- Whole ladder measured as one spread
- Full loft and lie audit included
- Overlaps and holes marked in red
- Shaft and length tested separately
- Fee credited against a build
The Full Ledger
- Every club you carry, scoring end first
- A week of real golf between visits
- One continuous carry ladder at the end
- Written note on what to leave home
- Fee credited against a build
Counter Work, No Session Required
Plenty of what walks through the door does not need a fitting at all. A set that was fitted properly three years ago and has been living in a car boot since usually needs a lie check and new grips, not two hours of bay time. These are the prices for that.
| Operation | Labour | Turnaround | Included |
|---|---|---|---|
| Loft and lie audit, full set | $45 | Same visit | Measured and logged, no bending included |
| Loft or lie bend, per club | $9 | Same visit | Forged and cast both handled |
| Regrip, per club | $6 plus grip | Same day | Any brand, any build-up you want |
| Shaft pull and reshaft, iron | $28 plus shaft | 3 to 5 days | Includes ferrule and swingweight check |
| Shaft pull and reshaft, wood | $34 plus shaft | 3 to 5 days | Adapter reused where it is sound |
| Length change with weight correction | $16 per club | 1 to 2 days | Tip or butt, swingweight restored |
| Swingweight matching, per set | $55 | 2 days | Brought to a single target across the ladder |
| Ferrule replacement and refinish | $8 per club | 2 days | Turned down flush on the lathe |
| Groove measurement and report | $20 | Same visit | Depth and edge radius against a new reference |
| Putter length, lie and counterweight | $38 | Same visit | Grip re-fitted afterwards |
Turnaround assumes the component is on the shelf. Anything ordered in adds whatever the supplier takes, and we will tell you that number before you agree to it rather than afterwards.
How Component Pricing Works
Shafts, heads, grips and adapters are billed at our landed cost plus a flat handling charge of eighteen percent. That figure does not change by brand, which is the entire point — there is no component in the building that earns us more than any other, so nothing on the shelf has a reason to win an argument it should lose.
You are welcome to see the invoice line. Several customers ask every year and nobody has been refused.
What Is Not Charged For
Re-checking a build we did. Adjusting a lie we set if it drifts inside a season. Answering a question on the phone. Looking at a club on the counter and telling you it is fine. None of these has ever appeared on an invoice here and none of them is going to.
Nothing Here Changes at the Counter
If a number on this page is not the number on your invoice, the invoice is wrong and we will fix it.